Daily
Agenda
Cisco
Systems® CCNA®
Certification Course
(5 Day Package) |
Day |
Material |
1 |
Configure a Catalyst switch for basic operations, given a need for plug-and-play operation |
2 |
Configure and troubleshoot Virtual LANs (VLANs), given an operational access layer switch |
3 |
Configure and troubleshoot Routing Information Protocol (RIP), Interior Gateway Routing Protocol (IGRP), Enhanced Interior Gateway Routing Protocol (EIGRP), and Open Shortest Path First (OSPF), given operational routers |
4 |
Configure IP access lists, given a functioning router Configure serial interfaces using PPP and High-Level Data Link Control (HDLC), given a functioning router |
5 |
Configure DDR between two routers with Basic Rate interface (BRI) or Primary Rate Interface (PRI)
Configure Frame Relay, given functioning Cisco routers
|
5 |
Exam 640-802 |
It is extremely important
that you attend every session
and are on time. The intense
nature of this course requires
students understand that there
are often long days. Many
students remain at the facility
up to 12 hours at a time.
CCDA, CCDP, CCIE, CCIP, CCNA,
CCNP, Cisco, Cisco IOS, Cisco
Systems, the Cisco Systems logo,
and Networking Academy are registered
trademarks or trademarks of Cisco
Systems, Inc. and/or its affiliates
in the U.S. and certain other
countries. All other trademarks
mentioned in this web site are
the property of their respective
owners. |
